Leading 10 typical forklift crashes ， forklift procedure need to pay attention to these matters ！.
Leading 10 typical forklift crashes ， forklift procedure need to pay attention to these matters ！.
Blog Article
Don't ignore the forklift at the workplace. If the procedure is bad, there will certainly be serious accidents in minutes, and there are many mishaps involving forklifts.
Situation 1: The forklift cargo obstructed the motorist's view, and the individual in front can not be found, leading to a moving accident.
Situation 2: In order to maintain the balance of the forklift when lifting hefty products, the workers used their body weight as the weight, which almost triggered casualties.
Instance 3: The size of the forklift cargo exceeds the allowed size of the course and hangs on the roadside rack, which almost creates an accident.
Instance 4: Forklift is speeding and rolls over during a turn.
Instance 5: The forklift driver did not discover the pedestrian, and the pedestrian did not see the forklift.
Case 6: The forklift lifts the employees illegally, the forklift vehicle driver does not use the safety belt, the forklift lifter falls and the chauffeur is crushed when the forklift rolls over.
Instance 7: The forklift driver did not wear a safety belt and fell from the lorry when it surrendered and was crushed.
Forklift operation need to pay attention to these matters ：.
Start.
1. Prior to beginning, observe the environments, and after validating that there are no obstacles that impede the safety and security of driving, honk the horn first and then begin.
2. For vehicles with hydraulic ( atmospheric pressure) brakes, the brake hydraulic pressure (air pressure) gauge must be risk-free before beginning.
3. When the forklift starts with a load, the vehicle driver must initially verify that the load is stable and trusted.
4. The start should be slow and consistent.
Driving.
1. When driving, the height in between the bottom end of the fork and the ground ought to be kept at 300mm-400mm, and the mast must be tilted backward. .
2. Do not raise the fork expensive when driving. When entering and leaving the task site or while driving, take care that there will certainly be no obstacles overhead. When the load is taking a trip, the fork has to not be increased too high, which will influence the security of the forklift. .
3. After unloading, the fork should be decreased to the normal driving position prior to driving. .
4. When turning, if there are pedestrians or vehicles close by, the driving signal ought to be released first. High-speed sharp turns are prohibited. High-speed sharp turns will certainly trigger the lorry to shed lateral stability and topple. .
5. When the forklift is downhill, it is strictly forbidden to turn off the fire and slide, and it is restricted to brake instantly while driving with loads unless there are unique situations.
6. When the forklift is running, it should comply with the website traffic rules in the factory and must keep a certain security range from the vehicle ahead. .
7. When the forklift is running, the load needs to remain in the lowest placement that does not prevent the driving, and the gantry should be correctly tilted back. The lots will not be increased other than when stacking or loading. .
8. The height of the load must not block the chauffeur's sight. In unique situations, when the item affects the forward vision, drive at a low speed when turning around.
9. It is forbidden to turn on the ramp, nor to drive across the ramp. .
10. The risk-free driving speed of the forklift in the factory area is 5 km/h, and it has to drive securely at a low rate when getting in the production workshop area. .
11. When the forklift is raised, raised or driven, it is forbidden for workers to stand on the fork to hold products and play a stabilizing function. .
12. If issues are located, they will be repaired and reported in a prompt fashion, and they will never run with diseases or conceal them.
filling and discharging.
1. When fork-loading products, the distance in between both forks need to be readjusted as required to make the load of the two forks balanced and not manipulated, and one side of the product need to protest the rack. .
2. It is forbidden to collaborate with a single fork or make use of a fork top Electric Forklift Truck for Warehouse or draw. In unique circumstances, safety and security warning signs have to be established to remind bordering pedestrians. .
3. In the process of loading and dumping things, the forklift has to be stopped with the brake. .
4. The speed of the automobile ought to be slow-moving and stable. Take care not to roll the wheels on the dunnage, so as not to stretch the rolled things and hurt people. .
5. When using a fork to fork the goods, the fork needs to be as deep as possible under the lots, and it should be kept in mind that the fork tip must not touch other items or objects. The tons must be stabilized with very little back tilt of the gantry to make sure that the lots does not slide in reverse. The mast can be tilted ahead a little when the tons is decreased to allow for easy placement of the lots and removal of the forks. .
6. It is restricted to fork items at high speed and hit tough things with the fork head. .
7. When the forklift is working, it is restricted for individuals to stand around the fork, so as to avoid the collapse of the goods and harm individuals. .
8. Overloading is restricted, and it is forbidden to use forks to lift workers to take part in high-altitude operations to avoid high-altitude falling mishaps. .
9. It is not allowed to make use of the brake inertia to slip, put, round or roll items. .
10. It is not allowed to use forks to choose, transform pallet discharge.
Leaving .
1. It is forbidden to leave the forklift when the items on the fork are in the air. Prior to leaving the forklift, you must unload the goods or lower the fork structure.
2. Pull the hand brake manage to dead or depress the emergency brake switch.
3. The engine is turned off and the power is removed. (Except for unique conditions, such as the chauffeur does not leave the automobile's line of sight and does not go beyond 1 min).
4. Remove the secret. .
Forklift Operation Precautions.
1. Prior to and after the forklift procedure, the appearance should be examined, and gas, lubricating oil and air conditioning water must be added.
2. Inspect the security efficiency of starting, running and stopping.
3. Check whether the lights and horn signals are complete and effective.
4. Throughout the operation of the forklift, check whether the pressure and temperature are normal.
5. After the forklift is running, the exterior leakage needs to also be inspected and the seals need to be replaced in time.
Forklift Safety Operation Specifications.
1. You need to check prior to leaving the automobile;.
2. When you run into somebody before you throughout driving, you should send out a signal at a distance of 5 m;.
3. The driving speed in the manufacturing facility does not go beyond 5 km/h;.
4. When driving, the low point of the cargo must be 0.3 m ~ 0.4 m in the air;.
5. The turning ought to not be as well sharp to stop the propensity of "free turning";.
6. Running up and down the incline ought to be slow-moving and uniform, and no turning on the slope is allowed.
7. Do not drive across the gradient. When the gradient is higher than 10%, the automobile needs to be driven backwards when going downhill;.
8. When the forklift personnel carry the goods and move forward, if they experience big or hefty items and go to the motorist's line of vision, they ought to take the reversing exercise
.
The "Eight Prohibitions" should be followed in the procedure.
1. Solitary fork operation is not allowed.
2. It is not allowed to raise the goods for cross country driving.
3. It is not permitted to get the goods by passing on the pallet with the fork.
4. It is not permitted to straight shovel chemicals, flammables and various other dangerous chemicals with forks.
5. It is not allowed to make use of inertia force to pick up the goods.
6. It is not permitted to utilize stopping force to expatriation round or easy-to-roll items.
7. It is not allowed to bring individuals to service the pallet or fork, and it is strictly restricted to stand under the fork after the fork is elevated.
8. Do not drive laterally on slopes
.
Car parking is not allowed under the following problems.
1. Contours, narrow roadways, railway crossings;.
2. Areas with a longitudinal incline above 5%.
3. When there is an obstacle on one side of the road, the contrary side of the Electric Forklift Truck for Warehouse section with the exact same size as the barrier must be within 20 meters at each end.
Web：https://www.onenforklifts.com/
Email：[email protected]
Phone：+86 13827083844